Setup

Image Projection

Rear Projection

■Place a translucent screen between the projector and the au- dience.

■Use the projector’s menu screen to reverse the projected im- age. (See page 56

for use of this func- tion.)

Note

•Optimal image quality can be achieved when the projector is positioned perpendicular to the screen with all feet flat and lev- eled.

Projection using a mirror

■Place a mirror (normal flat type) in front of the lens.

Info

•When using a mirror, be sure to carefully position both the projector and the mirror so the light does not shine into the eyes of the audience.

Ceiling-mount setup

■It is recommended that you use the optional Sharp ceiling-mount bracket for this installation.

■Before mounting the

projector, remove the Swivel Stand. (See pages 24 and 25 for removing and attaching the Swivel Stand.)

■Before mounting the projector, contact your

nearest Authorized SharpVision Service Center

or Dealer to obtain the recommended ceiling-mount bracket (sold separately). (AN-CM260 ceiling-mount bracket, AN- EP101B extension tube for AN-CM260.)

■When the projector is in the inverted position, use the upper edge of the screen as the base line.

■Use the projector’s menu screen to select the appropriate pro- jection mode. (See page 56 for use of this function.)

When using the default setting.

▼On-screen Display

The image is reversed.

When using the default setting. ▼On-screen Display

The image is inverted.

-28