Specifications
Product type | Projector |
Model | |
Video system | PAL/PAL |
| DTV 480I/480P/720P/1080I |
Display method | DLP chip, RGB optical shutter method |
DLP panel | Panel size: 0.6 |
| Display method: Single Panel Digital Micromirror Device (DMD™) by Texas Instruments |
| Drive method: Digital Light Processing (DLP™) |
| No. of dots: 589,824 dots (1,024 [H] 576 [V]) |
Lens | |
Projection lamp | 210 W/168 W SHP lamp |
Video input signal | RCA Connector: VIDEO (INPUT 4), composite video, 1.0 |
| terminated |
| Y (luminance signal): 1.0 |
C(chrominance signal): Burst 0.286
Component input signal RCA Connector
(INPUT 1) Y: 1.0
PB: 0.7
PR: 0.7
Component input signal
(INPUT 2) DVI input signal: Digital
Y:1.0
PR: 0.7
Horizontal resolution | 520 TV lines (NTSC 3.58 input) | ||
RGB input signal |
| ||
| <Digital> |
| 50 Ω |
| Input impedance | ||
| Input level | ||
| <Analog> |
| 75 Ω |
| Input impedance | ||
| Input level | 0.7 | |
| <Synchronization signal> |
•Separate sync/Composite sync
| Input level TTL level | |
| Input impedance | 1 KΩ |
| • Green on sync |
|
| Input level (Synchronizing input) 0.286 | |
| Input impedance | 75 Ω |
Pixel clock |
| |
Vertical frequency |
| |
Horizontal frequency |
| |
Computer control signal | ||
Rated voltage | AC |
|
Input current | 3.2 A |
|
Rated frequency | 50/60 Hz |
|
Power consumption | 285 W |
|
Heat dissipation | 1,070 BTU/hour |
|
Operating temperature | 41°F to 95°F (5°C to 35°C) | |
Storage temperature | 4°F to 140°F (20°C to 60°C) | |
Cabinet | Plastic |
|
I/R carrier frequency | 38 kHz |
|
Dimensions (approx.) | 141⁄2 (W) 69⁄16 (H) 127⁄8 (D) (368 153.8 327 mm) (including swivel stand) | |
| 141⁄2 (W) 45⁄8 (H) 127⁄8 (D) (368 118 327 mm) (main body only) | |
Weight (approx.) | 10.1 lbs. (4.6 kg) (including swivel stand) | |
| 9.0 lbs. (4.1 kg) (main body only) | |
Supplied accessories | Remote control, Two AA size batteries, Power cord, Terminal cover, Lens cap (attached | |
| on the body), Operation manual, Screws for terminal cover | |
Replacement parts | Lamp unit (Lamp/cage module) | |
| (RRMCGA218WJSA), AA size batteries, Power cord (QACCDA007WJPZ), Terminal | |
| cover (GCOVAA116WJKB), Lens cap (CCAPHA004WJ01), Operation manual (TINS- | |
| B005WJZZ), Screws for terminal cover (XBBSN40P10000) |
This SHARP projector uses a DMD chip. This very | This unit has some inactive pixels within acceptable | ||
sophisticated chip contains 589,824 pixels. As with any high | tolerances which may result in inactive dots on the picture | ||
technology electronic equipment such as large screen TVs, | screen. This will not affect the picture quality or the life | ||
video systems and video cameras, there are certain | expectancy of the unit. If you have any questions about this | ||
acceptable tolerances that the equipment must conform to. | matter, please call toll free | ||
| 7427). | U.S.A. ONLY |
|
Appendix
Specifications are subject to change without notice. |