
Image Projection
on the remote con-trol or
on the projector,
STANDBY button
Turning the Power off1 Press

then press or
again while the confirmation message is displayed, to put the projector into the standby mode.
• A
Note
•If you accidentally pressed
and do not want to put the projectorSTANDBY button into the standby mode, wait until the
confirmation message disappears.
2 Unplug the power cord from the AC outlet after the cooling fan stops. Info
•Do not unplug the power cord dur- ing projection or cooling fan opera- tion. This can cause damage due to the rise in internal temperature, as the cooling fan also stops.
•When connected to equipment such as an amplifier, be sure to turn off the power to the equipment con- nected first and then to the projec- tor.
-32