Image Projection

Placement of the Projected Image Using the Keystone Correction

Place the projector at a distance from the screen that allows images to be projected onto the screen by referring to “Adjusting the Projection Distance” on pages 26 and 27.

1 Project the test pattern of the Keystone correction function onto the screen. Rotate the Focus ring until the image on the screen comes into focus. (See page 25.)

2 Change the projection angle using the Swivel Stand to properly project images onto the screen. (See page 24).

3 Align the edge of the screen closest to the projector with the test pattern by adjusting the zoom and the Swivel Stand. (See pages 24 and 25.)

4 Adjust the Keystone function so that the size of the projected image matches the screen size. (See page 33.)

5 Align the image on the screen by adjusting the zoom function and the Swivel Stand.

6 Adjust the focus so that the projected image is in focus at the center of the screen. (See page 25.)

Note

•The aspect ratio of the projected image shifts slightly when the lens shift is at a position other than the top position.

•The aspect ratio of the projected image also shifts slightly when the “H Keystone” and “V Keystone” functions are adjusted simultaneously.

: Screen area

-34