
This function allows you to select the input signal type Component or RGB for INPUT 2.
Select “Signal Type” in the “Options” menu on the menu screen.
➝For operating the menu screen, see pages 38 to 41.
Selected Item | Description |
|
|
RGB | Set when RGB signals are |
| received. |
Component | Set when Component signals |
are received. | |
|
|
Note
•“RGB” or “Component” can be selected
with on the remote control only in INPUT 2.
The video input system mode is preset to “Auto”; however, it can be changed to a specific system mode if the selected system mode is not compatible with the connected audiovisual equipment.
Select “Video System” in the “Options” menu on the menu screen.
➝For operating the menu screen, see pages 38 to 41.
Note
•When the system mode is set to “Auto”, you may not receive a clear picture due to signal differences. Should this occur, switch to the video system of the source signal.
•“Auto” cannot be set for
RGB/COMP. button
-52