Regarding the LampRemoving and Installing the Lamp Unit

Caution

•Be sure to remove the lamp unit by the handle. Do not touch the glass surface of the lamp unit or the inside of the projector.

•To avoid injury to yourself and damage to the lamp, carefully follow the steps below.

•Replace the lamp after turning off the power and unplugging the power cord.

1Put the projector into the standby mode.

•Press .

•Wait until the cooling fan stops.

2Unplug the power cord.

•Unplug the power cord from the AC socket.

•Leave the lamp until it has fully cooled down (about 1 hour).

3Remove the Swivel Stand. (See page 24.)4Remove the lamp unit cover.

•Loosen the user service screw that se- cures the lamp unit cover.

•Slide the lamp unit cover in the direc- tion of the arrow.

5Remove the lamp unit.

•Loosen the securing screws from the lamp unit. Hold the lamp unit by the handle and pull it in the direction of the arrow.

Lamp

BQC-XVZ200++1

unit

 

STANDBY button

Power cord

User service screw

-60