②Loosen and remove the oil filter, using an oil filter wrench.
③Smear a little engine oil on the rubber gasket of a new filter.
④Screw the new filter into place and tighten it by hand until the gasket contact the seat. Then, give it additional 『1.1/4 Turn』to seat the filter, using an filter wrench.
⑤Supply oil and install the filler cap. <Caution>
z If an oil filter wrench is not available, contact our au- thorized distributor or our engineering section.
z Oil Filter Part No.:
11.3Cleaning/Changing Air Filter Element
Clean | Every 200 hours |
|
|
Replace | Every 400 hours |
|
|
①Unfasten clips in the cleaner cap and remove the air cleaner cap.
②Unscrew the wing bolt and remove the air filter ele- ment.
③Clean or replace the air filter element, and reinstall it in reverse order.
<Caution>
zClean more frequently, if used in dusty environment.
zAir Filter Element Part No.
How to clean air filter element
<If the element has dried contaminants>
It may be cleaned by blowing compressed air from the inside. <If the element has carbon or oil>
It should be replaced to a new one.
OIL GAUGE (YELLOW)
OIL FILTER
GASKET
AIR CLEANER
SIDE DOOR
ELEMENTCLIP
WING BOLT
CLEANER
11.4 Cleaning/Changing Fuel Filter
Clean | Every 200 hours |
|
|
Replace | Every 400 hours |
|
|
FUEL LEVER
| CLOSE | RETAINING |
|
| RING |
① | Turn the fuel line valve lever to 『CLOSE』. | OPEN |
| ||
② | Unscrew the retaining ring by turning counterclockwise, and | CUP |
| remove the cup and fuel filter element. | |
|
|
③Discard any dust or water inside the cup, and clean the filter element by blowing compressed air. (or replace, if necessary) (When you replace the filter element, be sure to replace a
26
