Shindaiwa 4 Cycle Diesel Engine specifications SAE10W/30, Checking Coolant/Water

<Caution>

zIf the equipment is not leveled, you cannot obtain accurate oil level.

zDo not overfill (over H line) the engine oil. The excessive volume of engine oil may damage the engine (inside the cylinders)

■Selecting proper engine oil

Use the engine oil for Diesel engine in proper viscosity, in compliance with the ambient temperature.

UPPER LIMIT (H)

REQUIRE LEVEL

LOWER LIMIT (L)

<Caution>

zUse the API class CD grade or higher.

Viscosity and Temperature

Temperature	Over +20℃	+10 - +20℃	-10 - +40℃
Viscosity	SAE30	SAE20	SAE10W/30

6-2 Checking Coolant/Water

Danger : Injuries

zClose all doors and place locks during operating this equipment, to avoid injuries by uninten- tionally touching cooling fan and fan belt.

Danger : Burns

zDo not open the radiator cap while operating this equipment or immediately after stopping the equipment, to avoid sustaining burns from hot vapor.

Caution : Burns

zDo not touch the engine and muffler during operation and immediately after stopping the equipment, for the temperature can reach extremely high.

Check to see if the coolant/water level is between FULL and LOW levels in the reservoir tank. If the coolant/water is below the LOW level, fill the tank and the radiator accordingly.

6-2.1 Filling to the Reservoir Tank

①Take out the reservoir tank to remove the cap.

② Fill up the reservoir tank to the FULL level.

③ Install the cap back and tighten, and reinstall the tank to the equipment.

6-2.2 Filling to the Radiator

①Remove the top plate.

② Remove the radiator cap.

SIDE DOOR

CAP

RESERVOIR TANK

12