Troubleshooting Guide
LOW POWER OUTPUT
What To Check
Is the engine overheating?
Possible Cause
Operator is overworking the unit. Carburetor mixture is too lean.
Improper fuel ratio.
Fallen leaves or debris on intake cover..
Fan, fan cover, cylinder fins dirty or damaged
Carbon deposits on the piston or in the muffler.
Remedy
Operate at slower rate.
Consult with an authorized servicing dealer.
Refill with clean fresh unleaded gasoline with a pump octane of 87 or higher, mixed with Premium
Clean intake cover..
Clean, repair or replace as necessary.
Consult with an authorized servicing dealer
Engine is rough at all speeds. May also have black smoke and/or unburned fuel at the exhaust.
Clogged air cleaner element.
Loose or damaged spark plug.
Air leakage or clogged fuel line.
Water in the fuel.
Piston seizure.
Faulty carburetor and/or diaphragm
Clean or replace the air filter
Tighten or replace the spark plug. Restart. Check the Product Specifications page in this manual for the correct spark plug for this unit.
Repair or replace fuel filter and/or fuel line.
Refill with fresh fuel/oil mixture.
Consult with an authorized servicing dealer.
Engine is knocking.
Overheating condition.
Improper fuel.
Carbon deposits in the combustion chamber.
Consult with an authorized servicing dealer.
Check fuel octane rating; check for presence of alcohol in the fuel. Refuel as necessary.
Consult with an authorized servicing dealer.
Engine speed is reduced.
Heat sensor is activated, due to restricted air flow at intake cover.
Stop the engine. Clean debris blocking intake cover. Restart. Idle more than 1 minute. If engine speed is reduced again, consult with an authorized servicing dealer.
17
