Shindaiwa HT2510/EVC, EVC 81715, DH2510/EVC manual Safety Equipment and Labels, Specifications

Safety Equipment and Labels

Cover

ON-OFF

Switch

					Protector
DH2510
	CAUTION					ON-OFF
		READ AND	WEAR EYE THE BLADES	KEEPS HANDS
	FOLLOW THE		AND HEARING ARE SHARP!	CLEAR OF
	INSTRUCTIONS PROTECTION HANDLE WITH			CUTTER
	IN THE		AT ALL TIMES CARE.	BLADES WHEN		Switch
	OPERATORS		DURING	STARING THE
	MANUAL.		OPERATION.	ENGINE.
Throttle Interlock		Caution Label

IMPORTANT!

Caution, Danger, Warning, and Operation Information Labels: Make sure all information labels are undam- aged and readable. Immediately replace damaged or

missing information labels. New labels are available Throttle Interlock from your local authorized Shindaiwa dealer.

Figure 2

WARNING

Use caution to avoid misassembly Assemble as

per illustration

Cover

Warning Label

	Protector
CAUTION	READ AND	WEAR EYE	THE BLADES	KEEPS HANDS
	FOLLOW THE	AND HEARING	ARE SHARP!	CLEAR OF
HT2510	INSTRUCTIONS PROTECTION		HANDLE WITH	CUTTER
	IN THE	AT ALL TIMES	CARE.	BLADES WHEN
	OPERATORS	DURING		STARING THE
	MANUAL.	OPERATION.		ENGINE.

Caution Label

Specifications

Model	HT2510-30 / HT2510-40					DH2510-24 / DH2510-30
Engine Model	SHT2510					SDH2510
Engine Type	4-cycle, horizontal					cylinder, air cooled
Engine Bore x Stroke	34mm x 27mm
Engine Displacement		24.5cc
Unit Weight, Less Fuel	HT2510-30: 5.7kg (12.5lb)					DH2510-24: 5.8 kg (12.8 lb)
	HT2510-40: 6.0kg (13.2lb)					DH2510-30: 5.9 kg (13.0 lb)
Unit Dimensions (LxWxH)	HT2510-30: 1100 x 210 x 230mm					DH2510-24: 1100 x 245 x 230mm
	HT2510-40: 1400 x 210 x 230mm					DH2510-30: 1220 x 245 x 230mm
Max. Power.....................................................................................................................................1.1 hp (.83kw)@						7,500 rpm (min-1)
Fuel/oil ratio...........................................................................................................50:1 with *ISO-L-EGD or				JASO FC class 2-cycle Mixing Oil
Fuel Tank Capacity			0.55	liter/18.6 oz.
Carburetor...........................................................................................................................................Walbro WYJ,				Diaphragm type
Ignition......................................................................................................................................... Fully electronic,				program controlled
Spark Plug......................................................................................................................................................... NGK				CMR5H
Air Cleaner	Non-reversible heavy-duty filter element
Starting Method		Recoil type
Stopping Method	Slide switch, grounding type
Blade Length	HT2510-30: 740mm / HT2510-40: 1055mm					DH2510-24: 610mm / DH2510-30: 740mm
Blade Type	Double-blade cutting action: single-edged blade					Double-blade cutting action: Double-edged blade
Clutch Type	Centrifugal				clutch, dry-type
Gear Type		Spur			gears
Gear Lubrication	Lithium-based grease
Standard Equipment	Rear handle with integral controls, anti-vibe mountings, front handle with guard,
	spark plug wrench and blade scabbard (cover)
Options	Heavy-Duty Blade (30" & 40")
..............................................................................................................**EPA Emission Compliance Period	Category A

**The EPA emission compliance referred to on the emission compliance label located on the engine, indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements.

Category C = 50 hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours (Extended).

* meets or exceeds these specifications and is recommended for all Shindaiwa products.

Specifications are subject to change without notice.