
SHURE LINK NETWORKS
Shure Link Connections
Up to 16 Shure Link devices can be linked together and controlled from a single computer. Each unit comes supplied with one
|
|
|
|
|
|
|
| DP11EQ #1 |
|
|
|
|
|
| DP11EQ #2 |
|
| DFR11EQ | ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TO
COMPUTER
LINK IN | LINK OUT | ||
|
|
|
|
LINK OUT
LINK IN | LINK OUT | ||
|
|
|
|
LINK IN
1.Assign each unit a Device ID (0 through 15) via the DIP switches on the rear panel (see Shure Link Device ID, in the Hardware section of this manual).
NOTE: All units must have unique Device ID's. The software will not allow adjustments to be made to a Device ID which has multiple DP11EQ 's assigned to it.
2.Using the supplied
NOTE: Although a standard MIDI cable can be used to link units, Shure Link is not MIDI compatible.
Shure Link Options
Shure Link Device Menu
The Device menu displays the following information:
ÊDevice ID. This column lists all the Device ID's that are active in the network. The Device ID is assigned through the DIP switches. See Shure Link Device ID under Introduction. This column also indicates when there are multiple units.
Unit Name. See Naming a DP11EQ .
Scene. This column lists the name of the scene that is active in the device and the status of that scene if it has been modified. Once a modified scene has been saved to disk, the modified status changes.
Configuration. This column lists the signal processing modules active in that scene. The modules are listed in abbreviations as follows:
DP = Dynamics Processor PEQ = Parametric Equalizer GEQ = Graphic Equalizer DLY = Delay
3.X = DFR11EQ Version 3.X MEM ERR = Corrupted unit
NOTE: To access multiple units, please make sure that each unit has been assigned a different Device ID. If two or more units share the same Device ID, those units will be inaccessible to computer control. Make sure that each device in a Shure Link network has a different Device ID.
English ±23