Shure Program Group, Accessing the Connected DP11EQs | Shure

The Shure Program Group

The Shure program group contains the main application icon, a Windows Help file, and a Readme file with the most up-to-date information. To launch the application, double-click on the DP11EQ icon. This group will also contain other Shure software stored on your hard drive.

Configuring the Computer Serial Port

1.Launch the DP11EQ software.

2.Click on Communications in the main menu bar.

3.Click on the COM port option of the drop-down menu.

4.In the Serial Port Options window, select an available COM port on the computer.

5.Click on the OK button.

NOTE: The COM port selection is saved in the DP11EQ.INI file, and will not need to be selected again unless you need to change the hardware configuration.

Accessing the Connected DP11EQs

To bring the networked DP11EQ's online, click on the CONNECT button of the Main Control Panel, or select the Connect option of the Communications drop-down menu of the main menu bar. The program searches for each unit connected in the network, reading the Shure Link Device ID of each.

English ± 8

Image 9

Shure manual Shure Program Group, Configuring the Computer Serial Port, Accessing the Connected DP11EQs

Contents

DP11EQ Table of Contents Hardware Features Software FeaturesIntroduction Overview DP11EQ HardwareFront Panel Back Shure Link Device ID DIP Switches Audio Connections Main AmplifierSubgroup Insert Input Insert Software Installation Connecting the DP11EQ to a Computer via the RS-232 COM PortDP11EQ Software Introduction Configuring the Computer Serial Port Accessing the Connected DP11EQsShure Program Group Overview Processor Select Buttons Main Controls Dynamics Processor Dynamics Parameters Dynamics Processes GateExpander AGC Leveler Limiter Compressor Editing Dynamics Processes Snapshots Parametric Equalizer Setting and Adjusting Parametric Filters Parametric Equalizer Edit Boxes and ControlsHigh- and Low-Frequency Shelf/Cut Filters Cutting, Copying, and Pasting Parametric Filters Response Graph Meter Calibration IN/OUT Meters and Output Control Delay Delay for Solving Remote Speaker AlignmentDelay for Solving Phase Cancellation Problems Reversing the Output Signal Polarity Setting Delay by TimeSetting Delay by Distance Shure Link Connections Shure Link NetworksShure Link Options Shure Link Device Menu Scenes Maintenance To Save Settings to Disk SettingsTo Recall Settings from Disk Customizing Graph Colors Printing DP11EQ Settings Appendix A. SpecificationsLocking Out the Front Panel Exiting the DP11EQ Application Delay Single Unit Appendix B. Rack Mounting the DP11EQDual-Mounted Units Mounting in an Equipment Rack Appendix C. Connectors and Cables Audio ConnectorsAudio Cables In. to 1/4 -in. Unbalanced In. to 1/4 -in. BalancedIn. Balanced to 1/4 -in. Unbalanced XLR male to 1/4 -in. Balanced XLR female to 1/4 -in. Balanced XLR female to 1/4 -in. UnbalancedRCA to 1/4 -in. Unbalanced Computer Interface Ð 9-Pin to 9-Pin RS-232 Cable Digital Connectors and CablesComputer Interface Ð 9-Pin to 25-Pin RS-232 Cable Shure Link Cable Ð 5-Pin DIN Cable MIDI-compatible cable General Controls Appendix D. Keyboard Controls Parametric Equalizer Controls IN/OUT Meters and Output Slider Controls