ENGLISH |
| ENGLISH |
|
RECEIVER MOUNTING
Table Mounting
To mount a receiver on a table or other horizontal surface, attach the four adhesive bumpers to the bottom corners of the receiver and place the receiver on the mounting surface. See Figure 20.
R 
RUBBER FEET
TABLE MOUNTING THE UC4 RECEIVER
FIGURE 20
Rack Mounting a Single Receiver
To mount a single receiver in an audio equipment rack, select the single rack mounting kit supplied with the system and proceed as follows:
1.Remove the two screws from each side of the receiver. See Figure 21.
2.Position the large mounting bracket over the holes on one side of the receiver and secure them with the screws removed in Step 1. One of the brackets will be longer than the other.
UC4 RECEIVER
(TOP VIEW)
| BRACKET |
FRONT |
|
ANTENNA | ANTENNA |
HOLE PLUG | HOLE PLUG |
EQUIPMENT RACK
UC4 RECEIVER
(TOP VIEW)
FRONT
BRACKET
RACK MOUNTING A SINGLE UC4 RECEIVER
FIGURE 21
NOTE: If you are not front mounting the antennas with a UA600 Front Mount Conversion Kit, insert the plastic plugs into the bracket holes.
3. Secure the receiver to a
± 14 ±
