Declaration of Conformity

We of

Shure Incorporated 222 Hartrey Ave.

Evanston IL 60202–3696 U.S.A. 847–866–2200

declare under our sole responsibility that the following product,

Model: VP3

Name: VP3 Receiver

was tested and found to comply with Part 15 of the FCC rules.

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, in- cluding interference that may cause undesired operation.

Testing was completed by the following NVLAP or A2LA accredited laboratory:

D.L.S. Electronic Systems, Inc. 1250 Peterson Drive wheeling, Illinois 60090, U.S.A.

At the test location of

D.L.S. Electronic Systems, Inc.

166 South Carter

Genoa City, Wisconsin, 53128, U.S.A.,

Test Sites Number 1 and 2

Shure Inc., Manufacturer.

Signed:

Date: June 15, 1999

Name, Title: Craig Kozokar, Senior Quality Engineer

Additional Information for this Shure Wireless System

This Shure wireless transmitter is accepted under FCC Part 74 and/or Part 90.

IMPORTANT: Licensing of Shure wireless microphone equipment is the user’s responsibility, and licensability depends on the user’s classification and ap- plication, and on the selected frequency. Shure urges the user to consult the ap- propriate telecommunications authority before choosing and ordering frequencies.

Changes or modifications not expressly approved by Shure Inc. could void your au- thority to operate this equipment.

The information on this page supersedes the corresponding information in your Shure user’s guide.

English

– 12 –

English

Page 12
Image 12
Shure VP manual Declaration of Conformity