ANCB Installation, Continued
Instructions,
continued Step Procedure
4. Press the ANCB straight into slot 1. Make sure that you push
evenly on both edges of the board until the ANCB is firmly
seated
5. Secure the board to the cage with the screw you removed in
step 1.
6. Connect Ethernet crossover cable from 10BaseT connector
on SYSCON to 10BaseT connector on ANCB.
ETHERNET
CROSSOVER
CABLE
7. Make a selection from the following Table.
To make……. THEN goto……..
DataNET Copper
Connections Page 14
Fiber Optic Connections Page 16
6 • Installation 2000592-001