Command Summary
Command Descriptions
Description This chapter is intended for maintenance personnel.
This chapter provides definitions for all of the commands you will be
using for setup purposes or for performing test diagnostics.
Unique Commands These are the commands that are unique to the ANCB.
config address ip
ipaddr Set the ANCB IP address.
config address
ethernet eaddr Set the ANCB Ethernet hardware address.
config display Display the current ANCB non-volatile
parameters.
config netmask
xxx.xxx.xxx.xxx Set the ANCB IP subnetwork.
config iproute
routeaddr Set the default router IP address.
display links Display link state table.
hdlc setuptime Display and/or change the hdlc setuptime in
microseconds.
hdlc window Display and/or change the hdlc window.
download Download new software via Configuration
port.
list List next 22 log events.
list nnn List 22 events, starting with number nnn.
list nnn, xxx List xxx events, starting with number nnn.
list on Continuously list events from the log buffer,
as they are added (terminate by pressing any
key).
list clear Clear all events from log buffer.
login password Log in to device via Configuration port.
login password
remoteaddr Log in to remove device (ANCB or HUB).
2000592-001 Command Summary • 35