Description Once your PC is set up, as described in Configuring Your PC, you are
ready to connect to the Advance Maxum or NAU to configure the ANCB.
Connect PC to
Maxum
Connect a standard 9-pin COM cable from your PC COM port to RS232
Configuration Port located on the SYSCON.
RS232 PORT
Password Protection All utility programs on the ANCB are password protected. This insures
the data integrity of all configuration data and limits unwanted access of
the User’s network. To access any of the programs you must have a
logon password. The default password is password.
2000592-001 Data Communications Setup • 27