Using Other Functions
75
Step by Step
• Send a message,
code: *68/#68 Æpage67
• Leave an advisory message,
code: *69/#69 Æpage68
• Group ringing, code: *81/#81 Æpage 88
• Group call, code: *85/#85 Æpage88
• Suppress caller ID,
code: *86/#86 Æpage28
• Waiting tone, code: *87/#87 Æpage17
• Open door, code: *61 Æpage23
• Door opener on/off, code: *89/#89 Æpage24
• Control relay, code: *90/#90 Æpage78
• Do not disturb, code: *97/#97 Æpage21
• Ringer cutoff function, code: *98/#98 Æpage21
• Speed-dialing, code: *7 Æpage 43
• Associated service, code: *83 Æpage73
Precondition: You have a telephone that uses tone di-
aling (DTMF dialing) or you can switch your telephone
to tone dialing. The telephone is not connected to the
system.
DSet up a call to the system. Enter the station number
(contact your service personnel).
DWait for a continuous tone (if necessary switch the tele-
phone to tone dialing), then enter the internal number
that has been assigned to you and the associated PIN.
GEnter the code (necessary only if programmed in the
system).
DWait for a dial tone and then enter the code, suchas
*97 for Do not disturb on. Make other inputs as neces-
sary; (refer to the operating instructions for pulse and
DTMF telephones).
or
DDial the external number.
You can only execute one function at a time, or
set up only one outgoing connection.
The connection is immediately released after
successful activation of a function.
In the case of an external-external call, the con-
nection is released as soon as either of the par-
ties ends the call.