Step by Step
Making Ca lls
20
Assigning a Station Number (Not for U.S.)
If this function has been configured (contact System
Support), you can selectively assign a specific number
(DID number) to your telephone before making an exter-
nal call. The assigned number then a ppears on the
called party’s display.
CLift the handset.
F=: Enter the code.
DEnter the DID number you wish to use.
DDial the external number.
Trunk Flash
To activate ISDN-type services and features through the
network carrier’s analog trunks or those of other com-
munications platforms (such as "consultation hold"), you
must send a signal to the trunks before dialing the ser-
vice code or telephone number.
Precondition: You have set up an external connection
via an ana log line .
F>:
Press the key. LED flashes. Enter the code.
DEnter the service code and/or telephone number.
Associated Dialing/Dialing Aid
If this function has been configured (contact System
Support), you can use your telephone as a dialing aid for
other telephones.
CLift the handset.
F?@ Enter the code.
D LEnter the internal station number of the party for whom
you want to dial.
DEnter the number you wish to dial (external number
with external code).
Consultation