Installing the Gigaset USB Adapter 300

Installing the Gigaset USB Adapter 300

System requirements

To operate the adapter, you need:

uA PC running at a minimum of 466 MHz and one of the following operating systems: Windows Vista, Windows XP or Windows 2000

u64 MB RAM, more memory is recommended u Minimum free hard drive capacity of 30 MB u A free USB slot

u A CD-ROM drive or a DVD drive

Contents

The package contains the following components:

uOne Gigaset USB Adapter 300

uOne USB cable and a stand for the adapter

uOne CD-ROM with installation and configuration software, the detailed user guide and Adobe Reader, which you will need to read the user guide

uOne Quick Start Guide

Installation process

Note:

Only connect the Gigaset USB Adapter 300 to a free USB port on your PC when the Install Shield prompts you to do so.

First, the software included in delivery must be installed. This software contains both the driver software for the device and the tool for configuring and monitoring the Gigaset WLAN Adapter Monitor.

Only this software has been tailored precisely to the Gigaset USB Adapter 300. Similar drivers are included with the Windows driver databases. However, such drivers do not usually offer the full range of features or function in a completely different way.

Do not connect the Gigaset USB Adapter 300 to your PC until you are prompted to do so. If you insert the Gigaset USB Adapter 300 on your PC before the software is installed, Windows recognises the device automatically and displays a dialog window prompting the appropriate drivers. Click Cancel to close the dialog box. Remove the Gigaset USB Adapter 300 from the PC and start again by installing the software.

Note:

You may require administrator rights on your PC for the installation process.

11