Configuring the Gigaset USB Adapter 300

Only one client is allowed to connect to the access point within the two i minutes. If an error occurs, check whether another PC tried to connect to

the access point at the same time.

Configuration – Manual

Manual configuration of security settings is required if your access point does not support WPS or some components of your wireless network do not support WPA encryp- tion.

Successful communication in a WLAN depends on all the PCs using the same ID (SSID) and the same radio channel. In addition, the connected PCs must coordinate their transmission mode for successful data transfer.

You can choose the basic settings for each profile in the Common section of the Configuration tab.

ìSelect Manual for the Registration Mode

Note:

For security reasons, installation should be followed by changing the SSID of your WLAN, as the default SSID may also be known to unauthorised persons.

27