Installing the Gigaset USB Adapter 300
uYou can connect the Gigaset USB Adapter 300 to a free USB port on your PC via the USB cable supplied.
uTo optimally adjust the Gigaset USB Adapter 300 for operation in a fixed location you can install it with the supplied stand.
Operating the Gigaset USB Adapter 300 with the stand
ìOpen the stand. To do this, pull the front of the stand about 2 mm upwards (1) and then
remove it forwards (2). |
|
|
ì Push the USB cable from below through the | 1 | 4 |
| ||
stand (3). |
|
|
ìPress the USB plug between the fixtures in the direction of the arrow. Make sure that the logo on the plug is pointing forward (4).
2
3
ì Close the stand. Make sure that the clamps on the front of the stand snap in (5).
ì Pass the cable through the channel in the bottom and insert it in a free USB port on your PC
(6).
6
5
14