Configuring the Gigaset USB Adapter 300

ìIn the Default Key field, select one of these four created keys with which data trans- fer on your PC is to be encrypted.

ìClick Apply to accept the changes.

The security options of your Gigaset USB Adapter 300 have now been activated.

Configuration – Profile

Selecting a profile

The Gigaset WLAN Adapter Monitor can manage several configuration profiles for your Gigaset USB Adapter 300. If you want to use your PC in different wireless networks, for example, you can create several profiles and adjust them to the requirements of the individual networks. When changing networks, you only need to choose the appropriate profile for registering your PC in the new network.

The Gigaset USB Adapter 300 always uses the settings for the profile displayed in the Profile field.

Note:

Following installation, the DEFAULT profile contains common settings. When the connection to the access point is established via WPS, the data is stored in the DEFAULT profile. You can create and save more than one profile via WPS (e g. if you use your notebook in different wireless networks). Use different names for the profiles in this case.

Creating a profile

ìClick New next to the Profile field.

This opens a dialog for you to enter a profile name.

ìEnter a name for the new profile and confirm your entry with OK. The maximum length of the profile name is 29 characters.

Note:

To make it easier to recognise them again, it is advisable to use an "illustrative" name for the profiles. A suitable name for a profile could be the location of the wireless network.

The valid settings are still shown.

ìAdjust the settings to the requirements of the network environment.

ìClick Save.

35