| Appendix |
|
|
Problem | Causes and remedies |
|
|
Installation | If the following error message appears during Gigaset USB |
cancels under | Adapter 300 installation on the Windows 2000 operating sys- |
Windows 2000. | tem: “1608: Unable to create InstallDriver instance” and the |
| installation is cancelled, this is due to the fact that the Micro- |
| soft Network Client component is missing. |
| To install the Microsoft Network Client: |
| ì Select Start – Settings – Control Panel – Network and |
| |
| ì |
| ì Then click the following: Install – Client – Add – Client for |
| Microsoft Networks – OK. |
| The Microsoft Network Client component is now installed. |
| ì Restart your PC to apply the change. |
| ì Install the software, see the section entitled "Installing the |
| |
The data transfer | ì If possible, position your PC with the Gigaset USB Adapter |
rate seems too low. | 300 closer to the access point or remove any obstacles in |
| the line of sight. |
| ì |
| ì Change the transfer rate from AUTO to a fixed value if nec- |
| essary. |
| ì You have to change the transmission mode of the Gigaset |
| USB Adapter 300 to 802.11g. |
| ì Try another channel. Make sure that you change the chan- |
| nel setting on the access point first. |
The Gigaset USB | You have checked all of the causes specified above and still no |
Adapter 300 does | communication is possible. |
not work properly. | ì Uninstall the software and install it again as described in |
| the sections entitled "Uninstalling the Gigaset USB Adapter |
| |
| |
|
|
49