Siemens 300 Status indicators, Installing the Gigaset USB Adapter, Reading the connection quality on the icon

Installing the Gigaset USB Adapter 300

If no connection is currently active, a red cross appears above the icon and Disconnected appears in the QuickInfo.

Reading the connection quality on the icon

The icon changes gradually depending on the current connection quality. The better the connection quality, the higher the transmission speed.

With reasonable to poor connection:

ìIf possible, move your PC closer to the connection partner for greater field strength.

No WLAN available (red cross over bar)

There is no LAN available to which you could establish a connection within the reach of your Gigaset USB Adapter 300.

ìCheck the configuration of the access point and adjust the settings for the Gigaset USB Adapter 300 accordingly.

OR

ìChange your location to reduce the distance to a connection partner.

Status indicators

The Gigaset USB Adapter 300 has two status indicators (LEDs). They are used to indicate the

uOperating status (Power), green

uTransmission status (Link/Act), green

LED	State	Meaning
	On	The Gigaset USB Adapter 300 was installed successfully
Power		on your PC and is ready for operation.
	Off	The device is not ready.
	On	There is no connection to the wireless network.
WLAN
	Blinking	Data is being transmitted.
	Off	There is currently no data traffic.

18