Siemens 300 Uninstalling the Gigaset USB Adapter, Uninstalling the software, Completing uninstall, Uninstalling the Gigaset USB Adapter

Uninstalling the Gigaset USB Adapter 300

You may have to uninstall the Gigaset USB Adapter 300 if:

uAn error occurred during installation.

uThe Gigaset USB Adapter 300 is not working properly and the problem cannot be rectified (see the section entitled "Troubleshooting" on page 46).

uYou have acquired a newer version of the Gigaset USB Adapter 300 and the operat- ing instructions for the new device recommend uninstalling older versions.

uYou no longer need the Gigaset USB Adapter 300 and want to free up space on your hard drive and in working memory.

Uninstalling involves the following steps:

1.First uninstall the software for the Gigaset USB Adapter 300.

2.Then uninstall the hardware.

3.Complete the uninstall process.

Uninstalling the software

To uninstall the software for the Gigaset USB Adapter 300 from your PC:

ìClose all running programs.

ìSelect Start – Programs –Gigaset USB Adapter 300 – Uninstall Gigaset USB Adapter 300.

ìConfirm the security prompt for the uninstall process with OK.

The software and all the drivers will now be removed from your PC.

Note:

Do not restart your PC until you have also removed the hardware.

If you restart your PC before removing the Gigaset USB Adapter 300, Windows will automatically launch its hardware recognition program. If this happens, close automatic hardware recognition by clicking Cancel.

Completing uninstall

ìRemove the Gigaset USB Adapter 300 or the USB cable from the USB port of your PC.

ìFollow the remaining instructions and then restart your PC.