Profiset 30isdn
V
kap00.fm5
27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619
Safety precautions and approval

Safety precautions

The Profiset 30isdn complies with the European standard EN60
950, which deals with the safety of information technology
equipment including electrical business equipment.
This device has been designed with safety in mind, this protect-
ing both individuals and objects.
For your safety and protection, the telephone must not be used
in bathrooms, etc. as it is not splashproof.
There is always the danger of small objects being swallowed by
young children. In the case of the Profiset 30isdn, this applies in
particular to the connecting cord clip.
Please make sure that such items are not accessible to children.

Location of the telephone

The telephone should be operated in a controlled environ-
ment with an ambient temperature between + 5°C and
+ 40°C.
Under normal circumstances, the rubber feet of the
telephone will not leave marks on the installation surface.
However, due to the vast array of surface finishes applied to
furniture, marks on the installation surface cannot be ruled
out. Place the unit on a smooth, non-slip surface.
Do not install the telephone in a room where large quanti-
ties of dust accumulate; this can considerably reduce the
service life of the telephone.
Do not expose the telephone to direct sunlight or any other
source of heat, as this is liable to damage the electronic
equipment and the plastic casing.
Do not operate the telephone in damp environments such
as bathrooms.
The power supply connector of the NTBA must be inserted.