Call processing type | Siemens 30ISDN specs

Programming the telephone settings

Handset and loudspeaker volume

a

S23

1 ... 4

or

You can set the volume of the handset and loudspeaker to four levels (1...4: 1=minimum volume, 4=maximum vol- ume). The volume is preset to level 2. You can set the vol- ume via the digit keys or the +/- keys.

Handset is on-hook.

Start the programming procedure.

Press one of the keys 1 ... 4.

+/ -

S

Change the volume step by step via the +/- key.

Save the setting.

In the course of a call, you can change the volume via the +/- key. The setting applys only to the current call.

Call processing type

a S06 T 0 or 1

S

The following settings are possible:

●0 = Main station: If you were assigned MSNs by your network operator, this is the correct call processing type. Several devices with the same or different MSN can be connected to a main station, whereby calls be- tween these devices are liable for charges. “Main sta- tion“ is also the correct call processing type for oper- ating at the majority of extensions (PBX).

●1 = Point to point: Point to point connection = system operation. In the event of a telephone system failure, the telephone can be operated at a system connection. In this emergency operation scenario, the simple telephone functions can be activated. The telephone rings with every incoming call at the sys- tem connection irrespective of possibly entered MSN.

The telephone is preset to “Main station“.

Handset is on-hook.

Start the programming procedure.

Enter the password if necessary.

Press key 0 or 1 .

Save the setting.

30

Image 38

Siemens 30ISDN operating instructions Call processing type, S06 T 0 or Following settings are possible

Contents

Profiset 30isdn Your guide to this manual Profiset 30isdnProfiset 30isdn Profiset 30isdn Overview Profiset 30isdn Profiset 30isdn Overview Keys Location of the telephone Safety precautions and approvalSafety precautions Profiset 30isdn Approval and conformity Contents Isdn glossary Index Putting the telephone into operation Symbols used in these operating instructionsPutting the telephone into operation Page Handset cord coiled Telephone connecting cordPutting the telephone into operation Connect the telephone Program the multiple subscriber numbers MSNs Ntba Setting the national variants PBX operation only Program the trunk code Taking a call Putting the telephone into operation Try out the telephoneCalling another party Display-driven telephone operation SymbolsDigit display line Display Idle mode Display-driven telephone operation Connected mode 030234577 001.20 045672343 Calling users On-hook dialling Outgoing and incoming callsOutgoing and incoming calls Outgoing and incoming calls Number redial automatic dialling Is displayed Call forwarding Outgoing and incoming calls Accepting a callRejecting a call Disconnect Accepting call waiting Deactivating the call signal Do not disturbOutgoing and incoming calls Call waiting Rejecting call waiting Dialling a number from the call list Outgoing and incoming calls Call listRetrieving entries from the call list Storing a number from the call list Initiating a callback CallbackDeleting the call list Clearing a callback Ending a call disconnectingAccepting a callback Convenient and secure telephone communication Switching to mute consultation in the roomConvenient and secure telephone communication Activating/deactivating open listening Convenient and secure telephone communication Parking a call Resuming a parked callPage Keypad signalling Dtmf Calls involving two or more parties Switching between two calling parties togglingCalls involving two or more parties Calling the second party consultation Disconnecting one party Three-party conference Ending a conference and toggling between parties Ending a conference by disconnecting a partyCalls involving two or more parties Ending a conference Exiting from a conference Programming the destination dialling keys Programming keys on the telephoneProgramming keys on the telephone Programming the speed dialling keys Programming direct station selection babyphone Description Procedure Telephone settings Quick reference for available telephone settingsQuick reference for available telephone settings Password Programming the telephone settingsProgramming the telephone settings Programming the telephone settings Ringer volume Ringer melody S06 T 0 or Following settings are possible Call processing type Multiple Subscriber Numbers MSN Programming the telephone settings National variants Page Date/time Call number for call forwarding unconditional Enter the call number for call forwarding Save the setting Tariff unit factor Programming the telephone settings Clearing the summation meter S14 T Enabling/disabling call waiting Programming the telephone settings Clearing memory Checking the settings status Displaying the software version Maintenance Important information for installation and operationImportant information for installation and operation Removing and inserting the labelling cards Default settings Technical data Third party use/disposal Siemens Service Symptom Cause Action Isdn glossary Isdn glossary Isdn glossary Isdn glossary Toggling d è R è R Quick reference guideQuick reference guide Quick reference for available telephone settings Index Index Technical data Page Siemens Aktiengesellschaft