Outgoing and incoming calls

Call list

If a caller does not reach you or if a caller or a queued caller is rejected, the relevant call number (if it is known) is stored in the call list.

Up to 12 different call numbers can be stored. The number of retries of the same call number are also count- ed and displayed. The most recent entry is displayed first.

Retrieving entries from the call list

jThe most recent entry of the call list is displayed by press- ing the Call list key. Press the Call list key again to view the previous entries.

hIf you press the Disconnect key the display of the call list will disappear.

Dialling a number from the call list

Call numbers which are stored in the call list can be dialled as follows:

jPress the Call list key until the desired call number appears on the display.

cand d Lift the handset and talk.

If the connection to the party in the call list has been set up and answered, the entry is deleted from the call list.

Storing a number from the call list

Numbers from the call list can be programmed on a

Destination dialling key or Speed dialling key.

jSelect the number via the Call list key.

S10

Start the programming procedure.

zPress the Destination dialling key.

SSave the setting.

or

S11

Start the programming procedure.

T

Press the relevant digit key.

SSave the setting.

You can cancel a programming procedure without making any changes by pressing the Disconnect key h!

14

Page 22
Image 22
Siemens 30ISDN operating instructions Outgoing and incoming calls Call list, Retrieving entries from the call list