Siemens 30ISDN Programming keys on the telephone

Programming keys on the telephone

25

kap01.fm5

27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619

Programming keys on the telephone

Programming the destination dialling keys

Each Destination dialling key (at the top, left to the label-

ling card ➔page III) can be programmed with a frequently

used call number (up to 24 digits)

If a Destination dialling key has already been assigned,

the call number is displayed by pressing this key.

You can cancel a programming procedure without making

any changes by pressing the Disconnect key.

If you press the Number redial key, you can also program

the second Destination dialling key without having to exit

the programming procedure.

Programming the speed dialling keys

You can also program the digit keys 0 to 9 with frequently

used call numbers (up to 24 digits).

If a digit key has already been assigned with a speed dial-

ling number, the call number is displayed by pressing first

the speed dialling key and then the digit key.

aHandset is on-hook.

S10 Start the programming procedure.

TEnter the password if necessary.

zPress the Destination dialling key.

TEnter the call number.

WPress the Number redial key in order to be able to

program the second Destination dialling key with a call

number.

zPress the second Destination dialling key.

TEnter the call number.

SDestination dialling numbers are stored.

You can use the labelling cards supplied to note

the names of the users next to the associated

keys, for example (➔page 41).

Contents

Main Profiset 30isdn Your guide to this manual Profiset 30isdn Overview: Profiset 30isdn Overview: Keys Safety precautions and approval Safety precautions Location of the telephone Approval and conformity Page Contents Putting the telephone into operation Symbols used in these operating instructions Step 1: Check the contents of the package Step 2: Connect the telephone Step 3: Entitle the device to operate in restricted powering conditions Step 4: Program the multiple subscriber numbers (MSNs) Step 5: Setting the national variants Step 6 (PBX operation only): Program the trunk code Step 7: Try out the telephone Display-driven telephone operation Display-driven telephone operation Outgoing and incoming calls Calling users On-hook dialling Number redial (automatic dialling) Dialling call numbers using the Destination dialling keys (automatic dialling) Dialling call numbers using the Speed dialling keys (automatic dialling) Accepting a call Rejecting a call (Disconnect) Call forwarding Call waiting Deactivating the call signal (Do not disturb) Call list Callback Ending a call disconnecting Convenient and secure telephone communication Activating/deactivating open listening Switching to mute (consultation in the room) Parking a call Resuming a parked call Locking your telephone DTMF signalling Keypad signalling Overview: DTMF / keypad signalling Calls involving two or more parties Calling the second party (consultation) Switching between two calling parties (toggling) Disconnecting one party Three-party conference Ending a conference Programming keys on the telephone Programming keys on the telephone Programming the destination dialling keys Programming the speed dialling keys Programming keys on the telephone Programming direct station selection (babyphone) Quick reference for available telephone settings 27 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Quick reference for available telephone settings Description Procedure Telephone settings page Programming the telephone settings Password Ringer volume Ringer melody Handset and loudspeaker volume Call processing type Trunk code for operation at a PBX Multiple Subscriber Numbers (MSN) National variants Signalling method to control the ISDN services Connection code for parking/resuming a call Date/time Call number for call forwarding unconditional Tariff unit factor Activating/deactivating the display of charge/call time of the active call Activating/deactivating the display of charge/call time of the last outgoing call Activating/deactivating the summation meter for charges Clearing the summation meter Activating/deactivating the display of your own call number Enabling/disabling call waiting Clearing memory Checking the settings (status) Restoring the as-supplied condition Displaying the software version Important information for installation and operation ISDN supplementary services Technical data Default settings Overview: Signal tones Third party use/disposal Warranty Siemens Service Procedure in the case of malfunctions ISDN glossary Page Page Quick reference guide Quick reference guide Quick reference for available telephone settings 50 kurzba.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Quick reference for available telephone settings Description Procedure Telephone settings page Page Page Page Siemens Aktiengesellschaft http://www.siemens.de