Date/time | Siemens 30ISDN specification

Start the programming procedure.

The date and time are preset with zeros by default. The correct date and time are set automatically by the switch- ing centre the first time an outgoing call is set up. If your network operator does not support this service, you can program the date and time yourself. Your input is checked for plausibility.

The connection code is a number under which a call can be parked and later resumed (➔ page 18: ”Parking a call“). The permitted values are 1 to 99 or “none“ (no input).

Handset is on-hook, or a call is in progress. Start the programming procedure.

Programming the telephone settings

Connection code for parking/resuming a call

a or d

S05

TEnter the password if necessary.

TEnter the connection code.

SSave the setting.

Date/time

aHandset is on-hook.

S13

TEnter the password if necessary.

Enter first the date and then the time (e.g. “0709981022”

Tfor September 7, 1998 7-09-98 10.22 a.m.).

Please note that you have to differentiate between a.m. and p.m. in the following way:

“... 1030” stands for 10.30 a.m. “... 2230” stands for 10.30 p.m.

SSave the setting.

Call number for call forwarding unconditional

a

S02

T

You can forward calls to another telephone in order to be always reachable under your call number (➔ page 12: ”Call forwarding“).

The call number of the other telephone (including area code) must have been programmed before activating call forwarding.

Handset is on-hook.

Start the programming procedure.

Enter the password if necessary.

34

Image 42

Siemens 30ISDN operating instructions Date/time, Call number for call forwarding unconditional

Contents

Profiset 30isdn Profiset 30isdn Profiset 30isdnYour guide to this manual Profiset 30isdn Overview Profiset 30isdn Profiset 30isdn Overview Keys Safety precautions and approval Safety precautionsLocation of the telephone Profiset 30isdn Approval and conformity Contents Isdn glossary Index Symbols used in these operating instructions Putting the telephone into operationPutting the telephone into operation Page Telephone connecting cord Putting the telephone into operation Connect the telephoneHandset cord coiled Program the multiple subscriber numbers MSNs Ntba Setting the national variants PBX operation only Program the trunk code Putting the telephone into operation Try out the telephone Calling another partyTaking a call Display-driven telephone operation SymbolsDigit display line Display Idle mode Display-driven telephone operation Connected mode 030234577 001.20 045672343 Outgoing and incoming calls Outgoing and incoming callsCalling users On-hook dialling Outgoing and incoming calls Number redial automatic dialling Is displayed Outgoing and incoming calls Accepting a call Rejecting a call DisconnectCall forwarding Accepting call waiting Deactivating the call signal Do not disturbOutgoing and incoming calls Call waiting Rejecting call waiting Dialling a number from the call list Outgoing and incoming calls Call listRetrieving entries from the call list Storing a number from the call list Callback Deleting the call listInitiating a callback Ending a call disconnecting Accepting a callbackClearing a callback Convenient and secure telephone communication Switching to mute consultation in the roomConvenient and secure telephone communication Activating/deactivating open listening Convenient and secure telephone communication Parking a call Resuming a parked callPage Keypad signalling Dtmf Calls involving two or more parties Switching between two calling parties togglingCalls involving two or more parties Calling the second party consultation Disconnecting one party Three-party conference Ending a conference and toggling between parties Ending a conference by disconnecting a partyCalls involving two or more parties Ending a conference Exiting from a conference Programming the destination dialling keys Programming keys on the telephoneProgramming keys on the telephone Programming the speed dialling keys Programming direct station selection babyphone Quick reference for available telephone settings Quick reference for available telephone settingsDescription Procedure Telephone settings Programming the telephone settings Programming the telephone settingsPassword Programming the telephone settings Ringer volume Ringer melody S06 T 0 or Following settings are possible Call processing type Multiple Subscriber Numbers MSN Programming the telephone settings National variants Page Date/time Call number for call forwarding unconditional Enter the call number for call forwarding Save the setting Tariff unit factor Programming the telephone settings Clearing the summation meter S14 T Enabling/disabling call waiting Programming the telephone settings Clearing memory Checking the settings status Displaying the software version Maintenance Important information for installation and operationImportant information for installation and operation Removing and inserting the labelling cards Default settings Technical data Third party use/disposal Siemens Service Symptom Cause Action Isdn glossary Isdn glossary Isdn glossary Isdn glossary Quick reference guide Quick reference guideToggling d è R è R Quick reference for available telephone settings Index Index Technical data Page Siemens Aktiengesellschaft