Chapter 3: Configuration
For Windows XP
From the Start menu, point to Control
Panel and then click Network and
Internet Connections.
Click Network Connection and then click
Properties.
Click Network Connection and then click Properties.3.On the General tab, check out the list of installed network components.
Option 1: If you have no TCP/IP Protocol, click Install.
Option 2: If you have TCP/IP Protocol, go to Step 6.
Highlight Protocol and then click Add.
Click Internet Protocol(TCP/IP) and then click OK.
On the Local Area Connection Properties window, highlight Internet Protocol (TCP/IP) and then click Properties.
Under the General tab, enable Use the following IP address. Enter the IP address: 192.168.1.x (x is between 2 and 254), Subnet Mask: 255.255.255.0 and Default gateway: 192.168.1.1. Then click Ok.
