is the default setting.
IP type of Service:
The system provides some types of service for you to choose. The meaning of each type is the same as the denotation. The default one is No change.
IPQoS
To classify the upstream traffic by assigning the transmission priority of the data for different users, please use IP QoS to prioritize the data transmission.
The IP QoS allows you to set the settings based on layer three IP packets.
To add a new QoS setting, please Add in the page of Quality of Service, a page same as the right side will appear.
Traffic Class Name:
Type in a name as the traffic class for identification.
Protocol:
Choose the proper interface for this function. If you don’t know how to select, simply use the default one, TCP/UDP.
Source IP Address/ Subnet Mask:
You have to type in the source IP address (ex: 192.168.1.50) and subnet mask (ex:255.255.255.0) for the application (ex: FTP, HTTP and so on) that you want to invoke the QoS traffic rule.
Source Port:
Except the IP address, you also have to enter the source port. Type in the source port for the traffic rule. The range is from 0 to 65535.
Destination IP Address/Subnet Mask: You have to type in the destination IP address (ex: 192.168.1.254) and subnet mask (ex:255.255.255.0) for the application that
