Chapter 3: Configuration
For connecting through a hub, please refer to the following diagram for an example.
9 VAC
Install the USB Driver
For Windows ME
nRun the USB installation program from the CD provided by your device package.
oAn InstallShield Wizard will appear. Please wait for a moment.
pWhen the welcome screen appears, click Next for next step.
qWhen the InstallShield Wizard Complete appears, click Finish.
rPlug the USB cable between your device and PC.
Note: If the USB device is not detected, check the USB cable between the PC and the device. Also verify that the device is power on.
sThe system will detect the USB driver automatically. Now, the system will copy the proper files for this device.
tWhen the file copying finished, the dialog above will close. Now the USB driver is installed properly. You can use the device.
For Windows 2000
nRun the USB installation program from the CD provided by your device package.
