Chapter 5:Connection Mode
PPP Username:
Type in the username that you got from your ISP.
PPP Password:
Type in the password that you got from your ISP.
Always On:
Check this button to make the connection is always active.
Dial on Demand:
Click this button to make a connection while in demand. Enter the timeout to cut off the network connection if there is no activity for this router.
Manually Connect:
Click this button to make a connection by pressing the Connect button on the Advanced Setup-
In the Configure LAN side Settings web page, you have to fill in the data requested here.
Primary IP Address:
Type in the first IP address that you got from your ISP for your LAN connection.
Subnet Mask:
Type in the subnet mask that you got from your ISP for your LAN connection.
Configure the second IP Address and Subnet Mask for LAN interface: Check this box to make another set of IP Address and Subnet Mask to connect to your router if they are not included in the range that DHCP server accepts.
Secondary IP Address:
Type in the second IP address that you got from your ISP for your LAN connection.
Subnet Mask:
Type in the subnet mask that you got from your ISP for your LAN connection.
MTU:
It means the maximum size of the packet that transmitted in the network. The packet of the data greater than the number set here will be divided into several packets for transmitting. Type in the number into the field of MTU. The default setting is 1500.
DHCP Server On:
Check this item if DHCP service is needed on the LAN. The router will assign IP address, gateway address for each of your
Please type the username and password that you got from your ISP. Then click Next.
On the Configure LAN side Settings web page, the IP address and subnet mask will be shown on it. You can modify them if needed.
Type in all the necessary settings and click Next for next page.
