54Time/Charge

You can display the charge details and duration of calls as you speak , as well as setting a unit limit for out- going calls.

0HQX Î Time/Charge

C

 

After you have made the charge de- tail settings, you can display the call duration/charge details for the follo- wing call types:

Last call

All calls out

All calls in

Select a call type.

6HOHFW Display the data.

When displayed, you may do the fol- lowing:

'HOHWH Clear display.

2. End display.

Charge Settings

Set the parameters on the display.

Charge rate

C

 

(PIN 2 needed)

 

Enter the charges per unit/period.

Enter the currency in which charge details are to be shown.

Limit

C

 

(PIN 2 needed)

Special SIM cards allow you or the Service Provider to define a credit / period after which the phone is blok- ked for outgoing calls.

(GLW Enter the number of units.

Then confirm the credit or reset the counter. The display of Prepaid cards may vary depending on Ser- vice Provider.

Total amount

Display of the call duration/charges for all calls.

Incoming calls

Display of the charges for incoming calls, if these are separately billed.

Auto display

Call duration and call charges are displayed after each call.

Page 56
Image 56
Siemens SL45 manual 54Time/Charge, Last call All calls out, Charge Settings, 0HQX Î Time/Charge, Charge rate