68Fax/data mode using a PC
With the phone and a connected PC, you can transmit and receive faxes and data. Appropriate software for data communication/fax communi- cation must be available on your PC and there must be a connection (see p. 69) to the phone.
Use of the fax and data services must be enabled for you. Depending on the network, there are various ty- pes of fax/data reception; contact your Service Provider for details.
Fax/data
Your Service Provider must give you a phone number for telephony and a fax/data number.
Sending
Start your PC communication pro- gram and enter the required destina- tion phone number there.
Receiving
The call is signalled by a special rin- ger and its type (fax or data) is dis- played.
Incoming Data
Answer Reject
Now start the communication pro- gram in your PC to recieve the fax.
Speech/fax
Send
0HQX Î Setup Î
Fax/data mode Î
Send Sp/Fax
Set this function on the phone before transmission so that you can switch from voice mode to fax mode.
During the connection establish- ment, the following soft key is now available for two seconds:
6S)D[ Switch to the Send Sp/Fax mode.
)D[ Switch to the fax mode; you may now send a fax.
Receive
(Only if a special fax number is not available).
Start the communication program in your PC and switch on the function on the phone during the call (the PC accepts the connection).
0HQX Î Settings Î
Fax/data mode Î
Receiv.Sp/Fax
End transmission
End transmission with PC software and/or press $.
