8

Battery

Insert battery

Insert battery at the bottom of the

phone nand press inward until it clicks into place o.

o

n

Switch off the phone before you remove it!

Unlock battery o, then remove n.

Charge battery

The battery is not fully charged when delivered, so:

o

n

Interconnect the socket and the Sync Station n with the plug-in power supply.

Insert the phone into the Sync Stationoand press downward until it engages. The contact mes- sage is displayed (alternatively: plug in power supply directly to the phone).

￿The voltage indicated on the Sync Station must not be ex- ceeded.

Charging

The charger heats up when used for long periods. This is normal and not dangerous.

%When charging is in progress.

4End of charging

An empty battery is fully charged after about 2 hours. Charging is only possible in an ambient temperature of 5°C to 40°C (the charge icon flashes as a warning when the temperature is 5°C above/below).

Usage time

A fully charged battery provides 60 to 170 hours of standby time or 1 to 4 hours of talk time. The standby times/talk times are average values and depend on the opera- ting conditions (see table below).

Display of charge level:

Fully 01 2Empty charged

A beep sounds when the battery is nearly empty.

Operation

Time

Decrease of

carried out

(min)

standby time

 

 

 

Calling

1

30 - 60 min.

 

 

 

Playing music

30

30 h.

 

 

 

Display

½

30 min.

backlight*

 

 

 

 

 

Network search

1

5 - 10 min.

 

 

 

CB service

1

30 min.

*Key input, games, organizer etc.

Page 10
Image 10
Siemens SL45 manual Battery, Insert battery, Charge battery, Charging, Usage time