|
| Setup | 61 |
| |
|
|
|
|
| |
|
|
|
|
|
|
| 0HQX Î Setup Î Security Î | Network |
|
| |
|
| then select function: |
|
|
|
| PIN Control | 0HQX Î Setup Î Network Î |
| ||
| then select a function: |
| |||
| The PIN is usually requested each | Connection | C |
| |
| time the phone is switched on. You |
| |||
| can deactivate this control but you | This function is only displayed if it is |
| ||
| risk unauthorised use of the phone. | supported by the Service Provider. |
| ||
| Some Service Providers do not per- | Two independent phone numbers |
| ||
| mit this function. |
| |||
| must be registered on the phone. |
| |||
|
|
|
| ||
| Prevent new SIM | Select |
|
| |
(Phonecode)
The operation of your phone with another SIM card is prevented.
Codes
PIN 1
You can change the PIN to any
4 - 8 digit number (i.e . a number you may find easier to remember).
Enter old PIN.
2. Press.
/ 2. Enter new PIN.
/ 2. Repeat new PIN.
PIN 2
You can change the PIN 2 to any
Proceed as with PIN 1.
Phonecode
The default is 0000. You can also change the phone code to any 4 - 8 digit number. Proceed as with PIN 1.
Select the currently used phone number.
If you change frequently, it is more convenient to make the selection using the soft key (see p. 65).
Display the active phone number.
Special settings can be made for each pho- ne number (e.g. melody, call diversion etc). Switch to the required phone number first.
To switch the phone number/line: (in standby mode)
Press, then:
/LQH Press.
Lock
(Phonecode)
You may limit usage to one phone number.
