SpeedStream Powerline Wireless Router User Guide
Physical Details
Front Panel LEDs
|
| Figure 2: Front Panel |
Power | On - Normal operation. | |
| Off - No power | |
Status | On - Error condition. | |
| Off - Normal operation. | |
| Blinking - This LED blinks during start up, or when the Firmware is | |
| being upgraded. | |
LAN | For each LAN port, there are 2 LEDs | |
(1, 2, 3, 4) | ∙ | Link/Act |
|
| ∙ On - Corresponding LAN (hub) port is active. |
|
| ∙ Off - No active connection on the corresponding LAN (hub) |
|
| port. |
|
| ∙ Flashing - Data is being transmitted or received via the corre- |
|
| sponding LAN (hub) port. |
| ∙ | 100 |
|
| ∙ On - Corresponding LAN (hub) port is using 100BaseT. |
|
| ∙ Off - Corresponding LAN (hub) port connection is using |
|
| 10BaseT, or no active connection. |
WAN | Flashing - data is being transmitted or received via the WAN port. | |
| Off - no data is being transferred. | |
Wireless | On - Wireless connection available; Wireless Access Point is ready for | |
| use. |
|
| Off - No Wireless connection available. | |
| Flashing - Data is being transmitted or received via the Wireless access | |
| point. Data includes "network traffic" as well as user data. | |
Powerline | On - Powerline connection is available. | |
| Off - No Powerline connection available. | |
Flashing - Data is being transmitted or received via the Powerline inter- face. Data includes "network traffic" as well as user data.
4
