SpeedStream Powerline Wireless Router User Guide
Options
This screen allows advanced users to enter or change a number of settings. For normal opera- tion, there is no need to use this screen or change any settings. An example Options screen is shown below.
Figure 40: Options Screen
Data - Options Screen
Backup DNS
IP Address | Enter the IP Address of the DNS (Domain Name Servers) here. These | |
| DNS will be used only if the primary DNS is unavailable. | |
|
| |
TFTP |
| |
|
| |
Enable Firm- | ∙ If enabled, TFTP (Trivial FTP) can be used to upgrade the firm- | |
ware in this device. This is normally not required; a Windows | ||
ware Upgrade | ||
utility is available for this purpose. | ||
using TFTP | ||
∙ You must obtain the firmware upgrade file first; instructions for | ||
| ||
| using TFTP will be available with the upgrade. | |
|
| |
UPnP |
| |
|
| |
Enable UPnP | ∙ UPnP (Universal Plug and Play) allows automatic discovery and | |
configuration of equipment attached to your LAN. UPnP is by | ||
Services | ||
supported by Windows ME, XP, or later. | ||
| ||
| ∙ If Enabled, this device will be visible via UPnP. | |
| ∙ If Disabled, this device will not be visible via UPnP. | |
|
| |
Allow Configu- | ∙ If checked, then UPnP users can change the configuration. | |
∙ If Disabled, UPnP users can only view the configuration. | ||
ration... | ||
|
|
72
