Getting started | 9 |
The battery is not fully charged when delivered. Plug charger cable into the bottom of the phone n, plug the charger cable into a mains power socket and charge for at least 2.5 hours.
If the battery has been discharged fully the charge icon is not immediately visible when the charger is plugged in. It will appear after up to 2 hours. In this case the battery is fully charged after
n
o
o
Charge level display during operation
A beep sounds when the battery is nearly empty. The charge level of the
To remove, push the buttons on the side of the connector in the direction of the arrows o.
Charging timeAn empty battery is fully charged after about 2.5 hours. Charging is only possible within a temperature range of +5 °C to +40 °C. The mains voltage specified on the power supply unit must not be exceeded.
battery is only displayed correctly after an uninterrupted charging/ discharging cycle. You should therefore not remove the battery unnecessarily and where possible not finish the charging process early.
Additional information
The charger heats up when used for long periods. This is normal and not dangerous.
Operating timeA full battery will deliver up to 140 hours of standby time or 270 minutes of talktime (p. 75).