Siemens ST55 End call, Set volume, Redial previous numbers, Dialling with number keys, down, last, twice, §+List§, briefly, Phone number memo, Additional information

Calling15

Dialling with number keys

The phone must be switched on (standby mode).

J	Enter number (always with
	area code, if necessary
	with international dialling
	code).
§Clear§	A short press clears the last
	digit, a long press clears the
	entire phone number.
B Press Call key. The
	displayed phone number is
	dialled.
Additional information
§Save§	Save phone number in contacts/
to SIM card...............................		p. 23/p. 25
§Menu§	Call menu.............................	p. 19
Microphone off ..................................		p. 19
Auto key lock.....................................		p. 52
Control codes (DTMF) ......................		p. 19
Voice dialing......................................		p. 66

International dialling codes

In standby mode:

0 Hold down until a “+” is displayed.

§+List§ Press and select country.

Phone number memo

You can use the keypad to enter a phone number during a conversation. The person to whom you are speaking can hear these entries. When the connection has ended you can save or dial the phone number.

End call
A Press the End key briefly.
	The call is ended. Press this
	key even if the person on
	the other end of the line
	has hung up first.
Set volume
I	Use the joystick (top/
	bottom) to adjust the

volume (only possible during conversation).

Redial previous numbers

To redial the phone number last called:

B Press the Call key twice.

To redial other numbers that were dialled previously:

B Press the Call key once.

I	Pick out the required
	phone number from the
	list, then press the ...

B ... key.