Siemens ST55 Bearer settings, GPRS info, Transfer rate, DNS, DNS, Password, GPRS APN, Password, Call type, User name, User name, Dial number, CSD settings, Profile name

56Settings

Bearer settings

For SMS, MMS, WAP and e-mailservices at least one connection profile must be set up and activated. You can obtain the current settings from your service provider.

CSD settings

If it has not been pre-installed, enter the data or enter the required settings (your service provider will supply you with information on this):

Profile name

Give the profile a name or overwrite one that has been preselected

Call type

Select ISDN or analogue.

Dial number

Enter ISP number.

User name

Enter login name.

Password

Enter password (shown as a series of asterisks).

DNS

Enter the IP for the domain name server.

GPRS settings

You can activate GPRS for the profile and change the settings here. You can only start to use GPRS once you have activated GPRS on your phone.

Profile name

Give the profile a name or overwrite one that has been preselected

GPRS APN

Enter service provider address.

Authentication

Activate/deactivate.

User name

Enter user name (login name).

Password

Enter password (shown as a series of asterisks).

DNS

Enter IP for the domain name system.

GPRS info

Show information about the connection (download volume/duration).

Transfer rate

Set the data transfer rate.

Additional information

Prolonged GPRS connection can cause the temperature of the phone to rise. This is normal and not dangerous.