UM344-2

CALIBRATION AND MAINTENANCE

NOTE

Removing a transmitter can interrupt power to other transmitters powered from a common power source. Note the effect this can have on process control and operation and, if necessary, follow the proper procedures to shut down the process.

When disconnecting the SIGNAL leads, carefully insulate each lead as it is removed to prevent accidental electrical shorts.

2.Remove the enclosure cap for access to the terminal compartment

3.Connect MXC and DMM (milliammeter) to the loop as shown in either Figure 6-1 or 6-2. Set DMM to measure 4-20 mA.

Field Calibration Wiring - Open jumper at Circuit Junction.

4.Place loop in Manual mode.

5.Apply power to the Loop.

6.Establish communication between MXC and transmitter. Refer to Section 3.2 as necessary.

If the transmitter is configured for digital mode, reconfigure for analog mode by setting the short address to zero (0). Refer to Section 5.1.1.3 as necessary.

7.At the Main Menu, select the CAL/TEST program.

Step through the MXC screens and use the PREV and NEXT buttons to select the DAC OUTPUT calibration. Press SELECT (F4).

PRESSING ENTER WILL

SET TRANSMITTER

 

 

OUTPUT TO

 

A-

 

EN-

 

 

4.00 MA

 

BORT

 

TER

 

 

 

 

 

The MXC will display the adjacent screen:

8.Press ENTER (F4). The MXC will display:

ENTER OUTPUT CURRENT

MA

 

 

 

 

 

 

EN -

<

 

 

 

QUIT

 

TER

 

 

 

 

 

 

 

9.Read the ammeter. It should indicate: 4.000 ±0.0048 mA.

10.If output is within limits, press QUIT (F3) and proceed to step 13. If calibration is required, perform steps 11 and 12.

11.Respond to the prompt. Key in the current indicated by the ammeter and press ENTER (F4).

September 1995

6-3

Page 105
Image 105
Siemens UM344-2 user manual Pressing Enter will SET Transmitter Output to

UM344-2 specifications

The Siemens UM344-2 is a cutting-edge industrial controller designed to meet the demands of modern automation and control systems. This powerful device is specifically developed for use in various applications, including manufacturing, process control, and machinery integration. The UM344-2 stands out for its versatility and robust performance in harsh industrial environments.

One of the main features of the Siemens UM344-2 is its high processing speed, which allows for real-time data processing and decision-making. The controller utilizes advanced microprocessor technology, ensuring quick response times and efficient operation. Its architecture supports multitasking, enabling it to manage multiple processes simultaneously without compromising performance.

The UM344-2 features a modular design, which provides flexibility in configuration and scalability. Users can easily add or remove modules to tailor the system to specific application requirements. This adaptability is beneficial for businesses that need to scale their operations or adjust to changing production demands. The controller is compatible with a variety of I/O modules, allowing for seamless integration with other equipment and systems.

In terms of connectivity, the Siemens UM344-2 supports various communication protocols, including Profibus, Profinet, and Ethernet. This versatility ensures smooth data exchange between the controller and other devices in the automation ecosystem, facilitating comprehensive monitoring and control. The inclusion of these communication standards enhances interoperability and allows for the integration of legacy systems with newer technology.

The Siemens UM344-2 is equipped with advanced diagnostic tools, which enable users to monitor system performance and detect potential issues in real-time. This feature reduces downtime and maintenance costs by allowing for proactive management of the system. The controller also supports remote access capabilities, enabling technicians to troubleshoot and configure systems from off-site locations.

Safety is a critical consideration in industrial environments, and the UM344-2 is designed with this in mind. It incorporates safety-certified features, ensuring compliance with international safety standards. Users can implement safety functions directly within the controller, streamlining system design and reducing the need for external safety components.

Overall, the Siemens UM344-2 exemplifies the fusion of technology and practical application, making it an essential component for businesses looking to enhance their automation processes. With its high performance, flexibility, and focus on safety, the UM344-2 is a reliable choice for industries aiming for efficiency and innovation in their operations.