Siemens UM344-2 user manual Controller Block, End or Review Configuration

ON-LINE AND OFF-LINE OPERATION UM344-2

POWER-UP VALVE: 0 . 0 0 0 %

	SEL/	SEL/
EDIT	END	CONT

5.1.1.8 Controller Block

CONTROLLER: ON
LAST	NEXT	SEL/	SEL/
OPTN	OPTN	END	CONT

CONTROLLER TYPE: PID

LAST	NEXT	SEL/	SEL/
OPTN	OPTN	END	CONT
ACTION: REVERSE
LAST			SEL/
	NEXT	SEL/
OPTN	OPTN	END	CONT
PROPORTIONAL GAIN:
1 . 0 0 0 0
			SEL/
		SEL/
EDIT		END	CONT
MANUAL RESET TRACK:
N O
LAST	NEXT	SEL/	SEL/
OPTN	OPTN	END	CONT

5.1.1.9End or Review Configuration

3.Press EDIT (F1) to edit the Power-Up Valve setting. Press ENTER (F4) to change the setting, press QUIT (F3) to exit without changing the setting. Press SEL/CONT (F4) to return to the Function Block menu.

The controller function block provides an extensive range of Proportional-Integral-Derivative functions including PID, PD and ID. For more detailed descriptions of these controller functions refer to the appendix.

1.At the CONTROLLER BLOCK Screen press SELECT (F4) .

2.Press NEXT OPTN (F2) to turn the controller function ON or OFF.

3.Press SEL/CONT (F4) to configure the Controller Parameters or SEL/END (F3) to return to the Function Block menu.

4.At the CONTROLLER TYPE screen use LAST OPTN (F1) and NEXT OPTN (F2) to scroll through the PID, PD, ID options. Press SEL/CONT (F4) for the controller ACTION screen.

5.Press NEXT OPTN (F2) to select either a DIRECT or REVERSE acting controller. Press SEL/CONT (F4) to continue to the Proportional Gain, Time-Integral, Time Derivative, Derivative Gain, and Manual Reset blocks.

6.Press EDIT (F1) to edit a parameter. Press ENTER (F4) to change a parameter or QUIT (F3) to exit without changing the parameter.

7.Press SEL/CONT (F4) for the MANUAL RESET TRACK screen. Press NEXT OPTN (F2) to select YES or NO.

8.Press SEL/CONT (F4) to return to the Function Block Menu. This completes configuration.

5-10 September 1995