Global Positioning System (GPS)
Figure 10-26: AceManager : Misc - S53 Port
b.Set the Local Report Type, *PPLATSR, to your preferred NMEA sentence format.
Figure 10-27: AceManager : PinPoint - *PPLATSR
•E0 ‐ NMEA GGA and VTG sentences.
•E1 ‐ NMEA GGA, RMC, and VTG sentences.
c.Set Local Reporting Time Interval, using *PPLATS, to the number of seconds you want as an interval between reports being sent.
Figure 10-28: AceManager : PinPoint - *PPLATS
Streaming Messages (Local)
The PinPoint X can be configured to send standard NMEA messages (sentences) in ASCII over the serial port and/or USB port without a PPP connection to the local computer.
Send the command ATGPS1 to the serial port, ATGPS2 to the USB port, or ATGPS3 for both to begin the NMEA stream. The example below shows the stream in HyperTerminal connecting directly to a PinPoint X via the comport and/or USB port. To stop the stream, with either terminal connection, use the command ATGPS0 (this can be entered even while data is streaming).
|
|
|
|
|
|
|
Rev 3.0B Feb.08 |
|
|
|
|
| 99 |
|
|
|
