Sierra Wireless 20070914 manual PPLATS=n, PPLATSEXTRA=n, PPLATSR=n, PPMAXRETRIES=n, =1‐255 retries

Configuration Commands

*PPIP=d.d.d.d

IP address where GPS reports are sent (ATS Server IP). Also see *PPPORT.

•d.d.d.d=IP address

Example:

AT*PPIP=192.100.100.100

*PPLATS=n

Local ATS ‐ Causes GPS reports to also be sent out the serial or Ethernet link every n seconds, when there is a PPP connection to the serial host or a connection to the Ethernet port is estab‐ lished.

•n=0 : Disable

•n=1‐255 seconds

Tip: Sends to the PPP peer IP S110 with the Destination Port number

S53.

*PPLATSEXTRA=n

Have local ATS reporting (LATS) send up to 7 extra copies of a

GPS report to the subsequent ports.

•n=0 : Just the original report is sent (default).

•n=1‐7 : Send GPS report copies to that number of ports.

Example: If AT*PPLATSEXTRA=7 and the port in S53 is 1000, then GPS reports will be sent to ports 1000‐1008.

*PPLATSR=n

Indicates the type of GPS report to send to the local client (PPP/SLIP peer). See *PPGPSR.

•n=0x11 : Standard GPS Report

•n=0x12 : Standard GPS Report + UTC Date

•n=0x13 : Standard GPS Report + UTC Date + RF data

•n=0xE0 : GGA and VTG NMEA reports

•n=0xE1 : GGA, VTG and RMC NMEA reports

•n=0xF0 : TAIP reports

•n=0xF1 : Compact TAIP data

*PPMAXRETRIES=n

Maximum number retries when in Simple Reliable Mode.

•n=0 : Disabled

•n=1‐255 retries

Rev 3.0B Feb.08 154