Sierra Wireless 20070914 manual PassThru

Configuration Commands
Rev 3.0B Feb.08 140
address,thecellularconnectionwillbeclosed(sincetheIP
addresshaschanged)andhastobere‐initiated.(default).
•n=1:PrivateIPMode:WhentheHostinitiatesa1x
connection,thehostwillbegiventheIPaddressspecified
in*HOSTPRIVIP.Themodemwillthenperform1to1
NAT‐likeaddresstranslation,whichshieldstheHostfrom
networkIPchanges.
*HOSTPW=string
HostPassword forPAP,CHAP,orPPPoE.
•string=password
*HOSTUID=string
HostUserIDforPAP,CHAP,orPPPoE.
•string=userid(upto64bytes)
PassThru
PassThr uModeisusedtocommunicatedirectlytothe
PinPointXinternalhardware.
Caution: While the modem is in PassThru mode, ALEOS is disabled.
If you need to connect to the PinPoint X while it is in PassThru mode,
you will need to do so with a terminal application. Not all commands
are available while the modem is in PassThru mode.
Figure 1-13: AceManager : PassThru
\APASSTHRU
Note: This mode is not available
through the remote AT telnet
server. You will need to connect
to the PinPoint X with it
connected directly to your
computer.
Setsthemodemoperationtopassthroughmode.Thismode
willpassanycharactersreceivedontheportEthernetdirectly
totheinternalhardwaremoduleandoutputanycharacters
fromtheinternalhardwaremoduleouttheportEthernet.This
allowsdirectaccess/configurationofthehardwaremodule.
Oncethismodeisentered,theunitmustbephysicallyresetto
returntonormaloperation.Thiscommandisnotavailablein
AceManager.