Sigma IB600, IB850, IB1100 13.2Attach the Rear to the Sides and Base, Attach the Top-Rear

12

13.2Attach the Rear to the Sides and Base:

The rear panel fits inside the Side and Base panels, make sure the flanges on the Side and Base panels are on the outside. The two holes on the Rear panel go towards the bottom.

13.3 Attach the Top-Rear:

Attach the top-rear panel to the Sides and Rear panels, with the flanges of the Top-rear panel on the outside. Do not attach Top-Front panel yet, this will be done after the flue has been mated with the fire.

14.0Fix the Outer Skin Kit (OSK) into the Cavity (IB1100 Only):

Slide the OSK into the cavity, ensuring the gas pipe passes through the grommet at the back of the OSK and is within 100mm of the front right hand corner. Secure the OSK to the wall using screws or other fasteners through the slots at the front of the Side panels.

G8860 _4 Installation Manual NZ